Transparent, acrylic-based substrate that offers strong adhesion.

Acrylic, water-based primer for walls, with strong adhesion and high penetration capability.

It is odourless, friendly for the user and the environment, ideal for indoors and especially for enclosed, inhabitated spaces.

It is suitable for the preparation of new surfaces painted with plastic paints, such as plaster, concrete, brick, non-plastered walls. It also strengthens and insulates porous surfaces painted with lime, low-quality paint for ceilings or low quality old paints and ensures excellent adhesion and spreading for the final paint susbtrate.

It is perfectly covered during the topcoat, even when white or pastel shades are used.

Application: Apply one coat of the primer, diluted up to 50% with clean water. For very absorbent surfaces apply the primer undiluted. Apply with a roller, brush or spray-gun. Treatments such as sanding, flame cleaning, etc. of painted surfaces may create hazardous dust and/or fumes. Work in a well-ventilated area. Appropriate personal protective equipment must be used.

Drying Time: Allow to dry at a temperature between 10°C and 35°C. It reaches dry-touch time in 1 hour and it can be recoated after 4 hours. These periods of times vary depending on the weather conditions (temperature, humidity).

Spreading Rate: 10-15 m²/l per layer, it is dependent on the absorbency of the surface and the dilution rate

Surfaces should be clean, dry and free of defective or poorly cohesive materials.