Synthetic powder pigments for cement, mortars and construction applications

Zeus Paints iron oxides are powder pigments suitable for colouring cement and cementitious materials. They are used in applications such as renders, mortars, tile grouts, industrial floors, paving blocks, concrete slabs, precast concrete elements, concrete, roof tile mortars and other construction or technical applications where stable and uniform colour is required.

Thanks to their colouring strength and good durability in construction applications, iron oxide pigments are a practical solution for professionals who want to colour cement-based mixtures with a controlled and repeatable result.

Ask About Available Colours

Iron oxide pigments can be used in many applications where the colour is incorporated into the mixture itself, rather than applied only on the surface.

Indicative applications:

• Renders and coloured mortars
• Cement screeds and cementitious mixtures
• Industrial floors
• Tile grouts and joint fillers
• Concrete slabs and precast concrete elements
• Paving blocks and pavement slabs
• Concrete and decorative concrete
• Roof tile mortars
• Asphalt and special technical applications, where the system is suitable

Zeus Paints supplies iron oxide and powder pigments in practical shades for construction and technical applications.

Available colours:

• Tile Red
• Ochre
• Black
• Brown
• Cassia
• Green — organic phthalocyanine powder
• Blue — organic phthalocyanine powder

Iron oxide pigments are widely used in construction applications because they provide stable colouring within the mixture itself.

Key benefits:

• Suitable for cement, mortars and concrete
• Good resistance in alkaline environments
• Good colour stability in outdoor conditions
• Uniform colouring when properly mixed
• Suitable for interior and exterior applications
• Practical solution for professional construction use

For the best result, the pigment should be properly dispersed into the mixture. The final colour depends on the type of cement, pigment dosage, water ratio, aggregates and application conditions.

General guidance:

• Add the pigment gradually into the dry mixture or according to the production process.
• Mix thoroughly to avoid lumps or uneven colour distribution.
• Keep the proportions stable from batch to batch for repeatable results.
• Carry out a small test before final application or production.
• Keep in mind that the final colour may change after drying and curing.

Important:
The exact dosage depends on the material, the desired colour intensity and the specific application. For professional use, a small-scale test is recommended before full production.

The final colour does not depend only on the pigment. For a consistent result, the main parameters of the mixture should be controlled.

Factors that influence the result:

• Type and colour of cement
• Pigment dosage
• Colour and particle size of aggregates
• Water ratio
• Mixing time and mixing intensity
• Application thickness
• Drying and curing conditions
• Differences between a small test batch and final production

Zeus Paints iron oxide pigments are suitable for professionals and businesses that use or produce cementitious materials.

Suitable for:

• Contractors and construction crews
• Paving block and concrete slab producers
• Industrial flooring applicators
• Render and mortar applicators
• Building material stores
• Professionals looking for powder pigments for special applications

Contact Zeus Paints for information about available colours, applications and the proper use of iron oxide pigments in cementitious mixtures.

Contact Us